Hi Diver! I'm Kelvin, click here to see accessories and upgrades for this product.
Manufacturer Reference / Part No.:
The new BTR-500 drysuit uses our latest Butyl Trilaminate Ripstop material to produce a lightweight but very durable suit. Everything from the material to the taping has been fine-tuned and optimized to make the BTR-500 an absolute pleasure to dive in, whether you are at 30ft/10m or 330ft/100m.
The BTR-500 uses our specially developed 600g/sqm Butyl Trilaminate, Ripstop material which incorporates a 140g/sqm High Decitex Nylon 6.6 Ripstop external lining for optimum tear, puncture and abrasion resistance that has the benefit of a easy clean and wash down finish. The internal lining is made from a patented coated that maximizes water integrity and seam tape adhesion as well as making the suit easy to get in and out of. The internal coating also make suit repairs exceptionally easy.
As with all our suits each panel that makes up the BTR-500 is cut on the bias of the material to increase the stretch and flexibility of the material by up to 15%. This, combined with clever panel designs makes this front entry suit especially easy to get on without the need to struggle to get the neck seal over the head. A composite zip maintains flexibility in the torso and is protected by a Velcro secured flap.
|•||Si-Tech inflator and auto shoulder dump|
|•||Composite front entry zip|
|•||Latex neck and wrist seals|
|•||Two large Velcro bellows side pockets with an internal D-rings|
|•||5mm thick neoprene socks (boots are available instead of socks at an additional cost)|
No customer questions submitted.